|
|
Post by TuskerKevin on Sept 8, 2013 12:56:13 GMT -5
Hi all,
I have looking for a good way to make my solos jump out a bit and to get them fuller. The solo boost my my QR goes from off to tear your face off and step on it loud, so I wanted a smoother option.
I couldn't be happier with the MXR 10 Band. Very versatile and adjustable. Sounds freaking great!
|
|
|
|
Post by jcortez on Sept 9, 2013 18:26:35 GMT -5
I also use the MXR 10 band EQ but, I use it more to take the edge off of the clean channel, works great and doesn't add any noise or tone suckage!
|
|
|
|
Post by sasquatch on Sept 13, 2013 10:45:01 GMT -5
TK... you running it out front, or in the loop?
|
|
|
|
Post by TuskerKevin on Sept 13, 2013 18:19:58 GMT -5
TK... you running it out front, or in the loop? In the loop. I am doing that because of the way I run my effects and wireless. I didn't want to add another cable. It doesn't add any noise, but really has a dramatic effect depending on how you set it. It makes solos wayyyy better. It has gain if you want it and volume. Really happy. |
|
|
|
Post by sasquatch on Sept 15, 2013 12:02:27 GMT -5
Are you running other F/X in the loop, too? Reason I ask... I run a couple Eventide units and a Rocktron Replifex in the loop, and tried patching an EP Booster in the loop along with the processors. I liked what it did for the sound, but it also created a hum I could not get rid of so I gave up on it.
|
|
|
|
Post by TuskerKevin on Sept 20, 2013 9:34:51 GMT -5
Are you running other F/X in the loop, too? Reason I ask... I run a couple Eventide units and a Rocktron Replifex in the loop, and tried patching an EP Booster in the loop along with the processors. I liked what it did for the sound, but it also created a hum I could not get rid of so I gave up on it. Yup, I have a HK Replex Delay, an EVH Flanger and sometimes an MXR chorus. I have no noise issues. |
|
tony
Newbie
Posts: 1 
|
Post by tony on Jan 3, 2014 16:41:48 GMT -5
Hey guys,
I'm starting to run more pedals, I usually run them in front of amp (not the loop). Is there a better way to do it? I also might add a wireless but afraid of my tone being sucked. Any suggestions? Im running mostly dirt and modulation, not too much clean stuff. I almost always have overdrive running (gear 1). I would also like to add a MXR 10 band EQ.
Pedals:
Multiplexer Octave
Delay
535 Q Wah
Swollen Pickle
Phase 90
|
|
|
|
Post by dcf on Mar 8, 2014 16:00:22 GMT -5
Just purchased a Mxr 10 eg. Why would u want a gain on this, I find it unusable. the eq has a tad bit of a hiss, other than that  . running it thru the loop for solo boost. |
|
|
|
Post by chrisinmd on Mar 23, 2014 11:08:03 GMT -5
Hey guys, just got my first QR, and im running an MXR 10 band EQ in front of the amp. The noise from it is horrible when i turn the volume off on my guitar. I unplug the power source for the pedal and the hum goes away, so i know thats the issue. The thing is, i run the same exact setup through the front of my Bogner Ecstacy and get zero noise.
How is this possible?
I got the EQ for the Bogner because i like to boost the mids on it and for solo boosting, the Splawn needs no help in this dept (why i got it). But like Tuskerkevin said, the Splawn solo boost practically rips your face off. So i thought about putting EQ in the loop, but not with that noise.
How am i getting noise from one amp and not the other?
|
|
. running it thru the loop for solo boost. 