|
|
Post by aw9190 on Feb 23, 2012 19:03:03 GMT -5
Hey guys I am just curious what your settings are. Do you find that you need to run treble, and presence fairly high, and bass before noon to get a clear tone? My street rod has stock tubes that supposedly are fairly new. Could the fact that I am liking a back panel cause this?
|
|
|
|
Post by akadave on Mar 1, 2012 14:58:36 GMT -5
I usually run my eq's at noon for the clean, and 11 oclock for treb, noon for mids and about noon for bass for drive. I keep presence at 0.
I spoke to Scott and he indicated that you need to leave the back panels on for cooling purposes. The back panels actually help keep it cooler. Odd I know.
|
|
gadzz
Member
Vote Obama OUT!!
Posts: 164
|
Post by gadzz on Mar 2, 2012 6:11:59 GMT -5
I run my drive channel eq's at 2 but my bass knob at 11-12 it is a bit darker than my QR also gain at 12-3ish don't use the clean much although the clean is better than my QR and I'm on the stock tubes
|
|
|
|
Post by elmariachi on Mar 2, 2012 9:58:39 GMT -5
I run my drive channel EQ similar to GADZZ.
Except that I run all three: Bass/Treble/Mid all around 1-2 o'clock.
I also run a Maxon OD808 in front to tighten it up. Gain at zero, tone at noon, at output dimed.
|
|
|
|
Post by akadave on Mar 2, 2012 12:53:13 GMT -5
I run my drive channel EQ similar to GADZZ. Except that I run all three: Bass/Treble/Mid all around 1-2 o'clock. I also run a Maxon OD808 in front to tighten it up. Gain at zero, tone at noon, at output dimed. Wow! My QR is the tightest amp I have ever played I cant imagine it being any tighter. Seems like the sound coming from these amps are all over the place. I have some say that theirs is dark, if anything they tend on the really bright side if my amp is a good example. I wonder why? |
|
|
|
Post by elmariachi on Mar 3, 2012 20:47:28 GMT -5
I run my drive channel EQ similar to GADZZ. Except that I run all three: Bass/Treble/Mid all around 1-2 o'clock. I also run a Maxon OD808 in front to tighten it up. Gain at zero, tone at noon, at output dimed. Wow! My QR is the tightest amp I have ever played I cant imagine it being any tighter. Seems like the sound coming from these amps are all over the place. I have some say that theirs is dark, if anything they tend on the really bright side if my amp is a good example. I wonder why? Mine's not flubby or dark by any means. I just like the extra juice from a clean boost for touch sensitivity and sustain. It's just me... |
|
|
|
Post by aw9190 on Mar 21, 2012 21:50:51 GMT -5
I was curious to see how you gentlemen are using it. I am experimenting with mine a bit. I had but kt77 in the power section to check them out in the amp, and the were pretty cool. I but the stock El34B in today, but didnt have a chance to really play on it to tell the difference between them. I have a feeling I am going to like the KT77 better. I am running stock pre amp tube but think I should give all JJ's a try. I have el34's with all jj pre's in my quick rod and it is awesome. I run an OCD boost in front of the QR, and it just makes it scream! does the same in front of the SR. Do you guys find that the SR has a softer bottom end than the QR?
|
|
