|
|
Post by akadave on Dec 31, 2011 18:05:32 GMT -5
Ive noticed that my SR is noisy. Its also picking up radio...is something amiss?
Thanks
Dave
|
|
|
|
Post by Ayton(e) on Dec 31, 2011 18:55:08 GMT -5
Happened to me. Cheap instrument cable with bad or broken shield. Not the amp.
|
|
|
|
Post by elmariachi on Jan 1, 2012 13:20:16 GMT -5
Agreed.
Check your cables. I had the same thing happen with my Suhr Badger. Turned out to be a bad patch cable I was using in the FX loop.
|
|
|
|
Post by richedie on Jan 1, 2012 17:11:49 GMT -5
My Egnater did that at times and it turned out to be the input jack! Easy fix with a little soldering. Some amp makers include what is needed, some don't. I think it was as easy as soldering on a resistor. Did you try another amp to rule things out?
|
|
|
|
Post by akadave on Jan 1, 2012 21:16:24 GMT -5
It may be power related. I use PlanetWaves cables. Could be that I have the footswitch cable coiled up against the amp and I have cables everywhere. Not going to worry too much...seems intermittent. Getting some serious articulation out of this thing and my Hamer Korina wood Vector
|
|
|
|
Post by richedie on Jan 2, 2012 8:24:47 GMT -5
Mostly when you get a radio signal it is due to the configuration of the amp's input jack, and it can be intermittent.
|
|
|
|
Post by splawndude on Jan 2, 2012 14:26:15 GMT -5
no one brought it up so I will...
if it is not a cable/jack it COULD be an overly microphonic preamp tube.
try 'tube rolling' or running a new preamp tube in there
|
|
|
|
Post by akadave on Jan 5, 2012 12:51:17 GMT -5
Well it looks like its a combination of cables and proximity to a radio station. Apparently my DSL 100 does it off and on.
|
|
