noah76
Junior Member
Posts: 80
|
Post by noah76 on May 15, 2009 2:31:13 GMT -5
Anyone running a TC Electronic G-System with a Comp? If so how do you have it hooked up?
|
|
|
|
Post by Lewis on May 15, 2009 6:55:14 GMT -5
I don't know if this helps but I'm running it with a Nitro and it works fantastic. 2 trs cables in the loop, 1 trs thru the insert and another trs for channel switching. Couldn't be happier! ;D
|
|
noah76
Junior Member
Posts: 80
|
Post by noah76 on May 15, 2009 10:50:49 GMT -5
cool thanks for the info.btw would you have a pic of your wire setup and rig if you dont mind.
|
|
|
|
Post by Lewis on May 15, 2009 16:36:51 GMT -5
No pic but it's a very simple setup. Insert out to the front input of amp, insert in to the send of fx loop and L (mono) out to the return of fx loop. And being the Comp has no channel switching you don't have worry about that part of the setup. Also if it's noisy then you'll have to try using trs balanced cables. I've been using Ernie Ball VP pedals for the vol and expression controls and they work great. I don't know if you've been to G-sys forum but there is a wealth of info there and they are very fast to answer your questions. forum.tcelectronic.com/viewforum.php?id=7Good luck! |
|
