|
|
Post by calebbuck on Mar 11, 2009 15:47:25 GMT -5
  Alas, the '09 splawn nitro is born! I wonder if it sounds good? I'll post pics with cab after practice tonight. |
|
|
|
Post by Tone Ranger on Aug 8, 2009 20:26:04 GMT -5
I have a 3 preamp tube QR. Sounds very tempting...
|
|
|
|
Post by stompboxfreak1972 on Aug 9, 2009 1:53:15 GMT -5
I have an 09 QR with the loop volume. Does your nitro have this ( 09 should). What tubes you have in it ?
|
|
|
|
Post by fastredponycar on Sept 1, 2009 19:07:52 GMT -5
How difficult is it to mod the pre 09's to incorporate the loop volume? Is it a simple mod that a decent amp tech should be able to do or is it a totally new loop circuit being used that would replace the old one?
I want to get the new one and was planning on talking with scott about whether or not it could be done at splawn con but unless that gets re-sceduled, I can't make it and would have to have it done locally (if it's possible to do)
|
|
|
|
Post by joelaroint on Sept 9, 2009 9:33:58 GMT -5
How difficult is it to mod the pre 09's to incorporate the loop volume? Is it a simple mod that a decent amp tech should be able to do or is it a totally new loop circuit being used that would replace the old one? I want to get the new one and was planning on talking with scott about whether or not it could be done at splawn con but unless that gets re-sceduled, I can't make it and would have to have it done locally (if it's possible to do) Scott said that he used a 100k pot, but he also designed a circuit which kept the amp from loosing the high end that normally gets lost when using a volume pedal. I'd call him. |
|
