|
|
Post by snappinnecks on May 2, 2008 9:02:44 GMT -5
Anyone know what size the hole is for the pilot light? Is it 14mm? Also is the light 120VAC?
I'm going to change the color, but need to know specifics.
|
|
|
|
Post by chrismac on May 2, 2008 9:24:28 GMT -5
its actually 10.160mm....in standard that is .400
|
|
|
|
Post by snappinnecks on May 2, 2008 13:25:00 GMT -5
Umm what? Is that less than 1/2 inch? Dude my math is terrible. Also what kind of power does it take?
|
|
|
|
Post by snappinnecks on May 2, 2008 13:28:54 GMT -5
If you were to order a different color replacement pilot light what would be the specs?
I found some on Ebay, but they come in different sizes and VAC DC yada yada yada.
|
|
|
|
Post by chrismac on May 2, 2008 14:11:03 GMT -5
yes, thats 2.5 mm less than 1/2 inch. you know man, im not sure on the specs on the electrical components at all. i just do the math. =)
|
|
|
|
Post by snappinnecks on May 2, 2008 14:45:47 GMT -5
well bad news..........it can't be changed. I thought it could, but apparently it is tied in with the power transformer and requires a high power light. Oh well. So much for changing it to blue.
|
|
|
|
Post by magh8 on May 3, 2008 19:09:13 GMT -5
I tried to get a dif color when I ordered mine.
|
|
