|
|
Post by BOZ on Nov 7, 2006 14:55:37 GMT -5
Help please,i want to run my Quickrod at half setting now as its just too loud on full,at the moment i have the ohm selector on 16 going into a Marshall 1960a 4x12,do i have to set the ohm selector to 8 now? cheers Boz..  |
|
|
|
Post by Pageplayer on Nov 7, 2006 15:11:40 GMT -5
|
|
|
|
Post by BOZ on Nov 7, 2006 15:56:12 GMT -5
Thanks Pageplayer,i have my amp into the right input on the cab which has 16 ohm above the input and 8 ohm below.cheers Boz  |
|
|
|
Post by TJ on Nov 7, 2006 16:13:09 GMT -5
But what's the correct setting to have it on in a 2x12 configuration? Would it still be 16 ohms or just 8? I"m sure Scott when preparing that manual was referring to a 4x12 speaker cabinet.
|
|
|
|
Post by Hacksaw on Nov 7, 2006 16:28:36 GMT -5
same.. its about the ohms, not how many speakers, the ohm thing in the manual was referencing no particular cab. so, if the cab is 16 ohms, running on 1/2 power on the amp would be 8 ohm on the amp. the cab stays at 16 ohm
TJ, depends how the 2x12 cab is wired. if its a 8 ohm cab. half power on the splawn you set it to 4 ohm on the amp. :-)
|
|
|
|
Post by Hacksaw on Nov 7, 2006 16:31:24 GMT -5
Thanks Pageplayer,i have my amp into the right input on the cab which has 16 ohm above the input and 8 ohm below.cheers Boz BOZ, you have the cab set to mono? correct? then its 16 ohms. Marshall cab correct? if its set to stereo, your cab is running 8 ohms. |
|
|
|
Post by BOZ on Nov 7, 2006 17:04:26 GMT -5
Thanks Pageplayer,i have my amp into the right input on the cab which has 16 ohm above the input and 8 ohm below.cheers Boz BOZ, you have the cab set to mono? correct? then its 16 ohms. Marshall cab correct? if its set to stereo, your cab is running 8 ohms. Yeah its running in mono,i just wanted to make shure i was not going to do any damage so i thought i would check,thanks for the replies guys..  |
|
|
|
Post by TJ on Nov 7, 2006 22:48:13 GMT -5
same.. its about the ohms, not how many speakers, the ohm thing in the manual was referencing no particular cab. so, if the cab is 16 ohms, running on 1/2 power on the amp would be 8 ohm on the amp. the cab stays at 16 ohm TJ, depends how the 2x12 cab is wired. if its a 8 ohm cab. half power on the splawn you set it to 4 ohm on the amp. :-) I have a 2x12 Marshall cab that has 16 ohms under each input but on the right above the input it says 8 ohms. I've always just ran the left side input of the cabinet at 16 ohms with the amp on 16 ohms also. |
|
|
|
Post by Hacksaw on Nov 7, 2006 22:52:46 GMT -5
same.. its about the ohms, not how many speakers, the ohm thing in the manual was referencing no particular cab. so, if the cab is 16 ohms, running on 1/2 power on the amp would be 8 ohm on the amp. the cab stays at 16 ohm TJ, depends how the 2x12 cab is wired. if its a 8 ohm cab. half power on the splawn you set it to 4 ohm on the amp. :-) I have a 2x12 Marshall cab that has 16 ohms under each input but on the right above the input it says 8 ohms. I've always just ran the left side input of the cabinet at 16 ohms with the amp on 16 ohms also. Hey TJ, does that cab have a stereo mono switch also? maybe its designed to daisy chain to another 2x12 then it would be 8. ?? is that a 1936 cab? |
|
|
|
Post by TJ on Nov 8, 2006 7:54:56 GMT -5
Doesn't have a stereo mono switch. It's a 1936 cab.
|
|
