|
|
Post by BOZ on Sept 9, 2006 7:00:39 GMT -5
Vom,i cant find that post but i just had a look at my midiverb and on the display some patches have L and R at the bottom and if you press the output button you get 1 level control,some patches have channel 1 and channel 2 at the bottom,press the output button and you get 2 level controls just set this higher and your set..i hope this works for you if not i will try and find that post again..as for the controller i used a Behringer FCB 1010 it worked fine.
|
|
|
|
Post by VomHalen on Sept 11, 2006 7:56:41 GMT -5
Vom,i cant find that post but i just had a look at my midiverb and on the display some patches have L and R at the bottom and if you press the output button you get 1 level control,some patches have channel 1 and channel 2 at the bottom,press the output button and you get 2 level controls just set this higher and your set..i hope this works for you if not i will try and find that post again..as for the controller i used a Behringer FCB 1010 it worked fine. thanks boz, i'll give it a shot, what are you using these days for effects? |
|
|
|
Post by BOZ on Sept 13, 2006 7:12:57 GMT -5
This,but i have better cables and a couple more effects since this photo..  |
|
|
|
Post by VomHalen on Sept 13, 2006 8:19:28 GMT -5
This,but i have better cables and a couple more effects since this photo.. yowza!!! that looks sweet! |
|
|
|
Post by Dirrty Craig on Sept 14, 2006 14:23:22 GMT -5
Good lord in heaven how can you drink 17 beers and use that foot board..
|
|
|
|
Post by shreder75 on Sept 15, 2006 7:32:11 GMT -5
Good lord in heaven how can you drink 17 beers and use that foot board.. simple..you only drink 16 and pray =D |
|
|
|
Post by BOZ on Sept 15, 2006 11:41:58 GMT -5
NO! NO! I drink and get someone else to tread on it!! ;D ;D
|
|
|
|
Post by Dirrty Craig on Sept 15, 2006 12:45:14 GMT -5
Heres a picture of my live rig floorboard. It has everything I need.. LMAO..  |
|
|
|
Post by shreder75 on Sept 15, 2006 12:53:06 GMT -5
^^^ hey! I have the same one! only mine's white =D
|
|
|
|
Post by DonaldDemon on Sept 15, 2006 13:21:03 GMT -5
I think donaldemon uses an actual volume pedal...not sure if it's a music man or what brand....It hink he puts it right in front of the amp... Yep, thats how I do it. I run the gain almost dimed (about 3 o' clock) on 2nd gear at shows. For most of the time I have my volume pedal about 2/3 cocked except for when I solo or have a heavy part where the drummer is bashing away and I need to keep up. This way, it cuts the gain a bit for rhythms and chord clarity and with a quick push of the foot I get ballz out gain. Sort of like having 2 channels that gradually change. BTW, I use an Ernie Ball 6166 Mono Volume pedal. Keep in mind that I have anywhere from 12-14 pedals on my board so worrying about the channel/OD/solo buttons on the footswitch makes things way to complicated. |
|
|
|
Post by shreder75 on Sept 15, 2006 13:28:34 GMT -5
see, I remember stuff..dont' let the blank look fool ya..that's my normal look =D
|
|
