|
|
Post by 89custom on Feb 29, 2008 16:41:46 GMT -5
Hello again, is it any problem to add a LED light on the 2 button footswitch so you can tell when the solo or channel is changed. Is it just as simple as drilling a hole installing a bulb and soldering it into the switch wiring. No power is needed for the bulb is there. Thanks
|
|
|
|
Post by 89custom on Apr 14, 2008 16:34:15 GMT -5
|
|
|
|
Post by Axemane on Apr 14, 2008 20:29:12 GMT -5
When I switch between playing my QR and my Splawn modded plexi I do miss the led lights at first,but I usually know when the 2nd gain stage is on and especially the solo boost because it is freakin' LOUD! ;D
I have been switching back and forth between the two amps and I love both of them. Each one sounds fookin' killer but each has it's own thing. Me likey a lotta.
|
|
|
|
Post by 89custom on Apr 15, 2008 10:03:23 GMT -5
I here you, but in doing more research on this forum and with Splawn, I play too friggin loud, they said set the Master to about 9'O'Clock and the Solo to 9-10'O'Clock, when playing at that volume the amp does not get that much louder with the solo in. At least not enough for me, that you have a hard time telling if its engaged or not. The solo boost doesn't make that much more difference after say 10'O'Clock, if anything it just adds more bottom, and the amp according to Splawn, can't physically get any louder, Bedroom vol. with the solo boost FORGETABOUTIT.
|
|
