tjdjr1
Junior Member
Posts: 70 
|
Post by tjdjr1 on Sept 30, 2018 14:02:33 GMT -5
I use a good Tuki cover for transporting my QR,I but would like to add Marshall style corners for additional protection, has anyone done this and if so how is the fit ? thanks, Tom |
|
|
|
Post by gtrjunior on Oct 1, 2018 6:55:07 GMT -5
I haven’t done that but it’s not a bad idea!
My best guess is that you could probably find some dimensions online for the corners and then just compare/contrast with measurements you take from the amp itself.
|
|
|
|
Post by splawndude on Oct 1, 2018 9:03:39 GMT -5
Agreed. That and I believe that the headshells would match the dimensions of the traditional big box Marshall plexis. That means, this should not be harder than you may think because it is a pretty standard size. There are several headbox replacement firms out there as well I believe and maybe even 'kit' providers like Ceriatone for example that might have parts and/or info.
I wouldn't personally bother Scott with something like this but he probably knows for sure. I guess it wouldn't hurt to shoot him an email and tell him what you want to do.
My Splawn was originally all black with gold piping but I traded the headshell it with someone who was looking for a 'Plexi' headshell because they were making a DIY Plexi with the Marshall logo and everything.
|
|
tjdjr1
Junior Member
Posts: 70
|
Post by tjdjr1 on Oct 2, 2018 17:37:47 GMT -5
I wound up getting some Marshall corners to try, once they get here I will try them. The radius of all the corners out there differ quite a bit.
|
|
