|
|
Post by marcor on Oct 1, 2017 21:38:03 GMT -5
I was testing the levels for some recording and caught this moment; I didn't even know which amp I was playing at the time and then realized it was the Splawn. Kind had me feel'n it... Backing track is the Digitech Trio +
|
|
|
|
Post by gtrjunior on Oct 2, 2017 12:28:16 GMT -5
Nice! Great job!!
|
|
|
|
Post by briman on Oct 2, 2017 18:12:06 GMT -5
Beautiful tone!😁
|
|
|
|
Post by hammered on Oct 2, 2017 19:27:26 GMT -5
Man that is some nice playing
|
|
|
|
Post by cvogue on Oct 3, 2017 0:46:48 GMT -5
Great tone and playing... wow! OK, enquiring minds wanna know... settings! Gear? OD1/OD2? Gain? Channel Volume? Loop volume? EQ? Effects used?  |
|
|
|
Post by marcor on Oct 3, 2017 8:32:46 GMT -5
Great tone and playing... wow! OK, enquiring minds wanna know... settings! Gear? OD1/OD2? Gain? Channel Volume? Loop volume? EQ? Effects used? Here are the setting:  The intro was OD1 I think 2nd Gear and at some point I think I switched to Solo on? My rig is a bit complex.. I use an Eganter Amp Switcher that allows you to toggle between four amps into a single cab with a line out ideal for a W/D/W configuration. I run the speaker out of the amp switcher into a Fryette Power Station for a speaker load and use the line out on the Egnater Amp Switcher to my FX rack and then out that in stereo to a VHT 2/50/2 into a pair of Port City OS 2x12 loaded with WH Veteran 30s and ET65 mix. Whew... The FX were a Lexicon PCM80 for reverb and an Eventide Eclipse for delay. And thanks everyone!!! |
|
|
|
Post by cvogue on Oct 3, 2017 12:18:51 GMT -5
Wow, channel volume was pretty low, did you have the loop volume down at all? Thanks!
|
|
|
|
Post by marcor on Oct 3, 2017 13:20:05 GMT -5
Wow, channel volume was pretty low, did you have the loop volume down at all? Thanks! No, I didn't. I'll have to look but I'm thinking the loop is deactivated too. |
|
|
|
Post by cvogue on Oct 3, 2017 13:23:37 GMT -5
Ahh, that would explain the low channel volume... these things are ripping loud without some attenuation.
Interesting that you get that much "oomph" out of a low volume setting, half power engaged by any chance?
Edit: I'm gonna have to try that at practice tonight, lower channel volume, bit more gain and less loop attenuation.
These Splawns really take some tweaking but man they sound great!
|
|
|
|
Post by marcor on Mar 10, 2018 11:54:17 GMT -5
I need to record a clean channel clip... Getting some amazing tones with an Eventide Eclipse and Lexicon PCM80. Like LA in the
80s!
|
|
