|
|
Post by raginghonkies on Sept 17, 2011 22:43:00 GMT -5
could someone help me with some instructions and values to Bias Myself my KT88 nitro ? Do i need a Bias Rite ? i only use the 2 middle tubes for half power ... Do i need to Bias even if i buy Matched Tubes from the online store ?
|
|
|
|
Post by splawndude on Sept 19, 2011 22:04:09 GMT -5
The safe way is to use a Bias Probe. There are several kinds out there depending how much you want to spend. The cheaper ones, like from Eurotubes for $25, will work but won't last as long. There is a Biasing guide in the FAQ section that will help. Start by finding your plate voltage. If you have any questions feel free to PM me or post back here. I don't hang out here as much as I used to.
Good Luck and Be Safe!
PS: you should always bias
|
|
