|
Post by LooseCannon on Oct 27, 2010 11:44:51 GMT -5
Hey guys, I need a suitable tool for opening the back of my Splawn cab, the only one that seems to fit was a standard flat screwdriver but it took forever and I think it may be wearing down the square screw heads.
Any suggestions?
Thanks
|
|
|
Post by brokenfusion on Oct 29, 2010 23:07:37 GMT -5
You should be able to get a square drive bit at any hardware store. Look by the deck screws.
|
|
|
Post by LooseCannon on Oct 30, 2010 5:39:14 GMT -5
Thanks man. Do you happen to know the size i'll need? Is there also a manual tool I could use rather than a drill?
|
|
|
Post by MetalHeart on Oct 30, 2010 7:52:30 GMT -5
I think a peterson#2. I need to pick one up myself.
|
|
|
Post by LooseCannon on Nov 2, 2010 7:43:32 GMT -5
What's a peterson#2?
|
|
|
Post by Ayton(e) on Nov 2, 2010 9:39:55 GMT -5
Just a guess, but the type and size of the bit you need for these square headed screws (like Torx #4 for computers.)
I wouldn't use a drill either. Look for a screwdriver that takes interchangeable heads. I've got one that came with a variety of these square bits, regular philips ones, torx ones, etc.
|
|
|
Post by LooseCannon on Nov 5, 2010 16:21:28 GMT -5
Just a guess, but the type and size of the bit you need for these square headed screws (like Torx #4 for computers.) I wouldn't use a drill either. Look for a screwdriver that takes interchangeable heads. I've got one that came with a variety of these square bits, regular philips ones, torx ones, etc. Thanks man. Could you tell me which size of the square bits you got fits the cab's screws?
|
|