|
|
Post by claptonman83 on Oct 13, 2018 5:39:43 GMT -5
Hey guys, I’m having a couple of big problems, first when trying to set the input level of the nova system to the clipping point it don’t clip at all even maxed out, second when I use the tuner mode it is set to mute on the piece and it don’t fully mute, and I’m wondering if anyone eles has had this problem and what is the solution for this? Thanks
|
|
|
|
Post by briman on Oct 13, 2018 11:56:22 GMT -5
I am using a wet dry wet setup and have a Boss Me 50 for my time based effects. It receives the signal from speaker jack converted to lign level and sends out to my stereo power amp. When I use the tuner on the me50, it doesn't mute the dry signal.....only the wet. This is because the dry is in front. Maybe you have something like this going on or have something in the loop of the nova or before etc?
Sorry this is all i can think of and i have never used a Nova. I remember seeing your posts on Facebook a while ago so you have been struggling with this issue for a bit? Have tried calling customer service at TC?
|
|
