|
Post by rodburner on Mar 2, 2018 14:26:28 GMT -5
Greetings Fellow Quick Rod owners. I’m a noob to the Splawn Quicl Rod and also here to the forum. I would like to invite everyone here to catalog their setting for their amp. Where you have the nobs set all the way accrpss the front of the amp. If you use pedals where they are placed and how they are adjusted. I’d like this to be a resource for all of us to reference and quickly get the Quick Rod dialed in and ready to gets tones out of.
Clean channel
Od channel
All nob settings for each
Non Settings for different gears
If you use pedals where - in front or in the loop and how the pedals are set
Using the loop how you have the effects loop adjusted
In closing I would like me to say thank you in advance for supporting this thread, best regards Rodburner
|
|
|
Post by briman on Mar 2, 2018 14:47:59 GMT -5
Greetings Fellow Quick Rod owners. I’m a noob to the Splawn Quicl Rod and also here to the forum. I would like to invite everyone here to catalog their setting for their amp. Where you have the nobs set all the way accrpss the front of the amp. If you use pedals where they are placed and how they are adjusted. I’d like this to be a resource for all of us to reference and quickly get the Quick Rod dialed in and ready to gets tones out of. Clean channel Od channel All nob settings for each Non Settings for different gears If you use pedals where - in front or in the loop and how the pedals are set Using the loop how you have the effects loop adjusted In closing I would like me to say thank you in advance for supporting this thread, best regards Rodburner Here are pics of my settings on my 2015 QR. This i would say is classic jcm800 tone. The loop volume is at roughly 11 o'clock and gear 2 od 1. Guitar》tuner》wah》flanger》phaser》noise suppressor》amp Loop is send》delay》chorus》return
|
|
|
Post by briman on Mar 2, 2018 14:50:45 GMT -5
Here's settings for my 2016 QR. This is pure VH1 tone. Same effects chain as 2015. Amp is drop b+ on. (Knobs will soon be black lol)
|
|
|
Post by gtrjunior on Mar 2, 2018 16:38:34 GMT -5
Here's settings for my 2016 QR. This is pure VH1 tone. Same effects chain as 2015. Amp is drop b+ on. (Knobs will soon be black lol) briman....just wondering why you have the gear selector on gear 2? From what I understand, when it’s in gear 1 you can footswitch between gears 1/2. When it’s set to gear 3, you toggle between gears 2/3. But what do you toggle between on gear 2?
|
|
|
Post by gtrjunior on Mar 2, 2018 16:39:55 GMT -5
Greetings Fellow Quick Rod owners. I’m a noob to the Splawn Quicl Rod and also here to the forum. I would like to invite everyone here to catalog their setting for their amp. Where you have the nobs set all the way accrpss the front of the amp. If you use pedals where they are placed and how they are adjusted. I’d like this to be a resource for all of us to reference and quickly get the Quick Rod dialed in and ready to gets tones out of. Clean channel Od channel All nob settings for each Non Settings for different gears If you use pedals where - in front or in the loop and how the pedals are set Using the loop how you have the effects loop adjusted In closing I would like me to say thank you in advance for supporting this thread, best regards Rodburner Welcome!!! I’ll get a post of my setup as soon as I get a few free minutes this weekend.
|
|
|
Post by briman on Mar 2, 2018 22:43:40 GMT -5
Gtrjunior I toggle between gear 1 and 2 when it's on gear 2. When the left light on pedal is on, it's gear 2, when it's off....gear 1.
For a long time i used to have dial on gear 3 and that way would be gear 3 when light on left and gear 2 when light off. I imagine if i put the dial on gear 1, it would be gear 2 with light on and gear 1 with it off. I think i tried this a long time ago don't remember for sure. I will try it tomorrow.
I could be wrong though lol as i don't switch gears very often.
|
|
|
Post by briman on Mar 2, 2018 22:48:00 GMT -5
My 2015 dial is on gear 3 but i am always in gear 2 od2 so the left light on pedal is off but the od light is on.
|
|
|
Post by gtrjunior on Mar 3, 2018 7:16:57 GMT -5
Yes, I think you’ve got it. If I have the dial on gear one, with the light”on” it will be in gear one...light off is gear 2. I don’t think I’ve ever put the dial in gear 2 and then used the footswitch to toggle. I guess it all depends on what you want to see on the pedal.
|
|
|
Post by briman on Mar 3, 2018 14:53:28 GMT -5
Yeah that's it. The left light is on when you have it in the gear that the dial is on.
|
|
tjdjr1
Junior Member
Posts: 70
|
Post by tjdjr1 on Mar 4, 2018 8:20:46 GMT -5
gain 13:00, volume 09:00, bass 12:00, mids 10:00, treble 10:00, presence 11:00 using gear 2, clean volume 09:00, bass 10:00, treble 12:00 and gain 03:00. all subject to change A cab vs B cab and venue....
|
|
tjdjr1
Junior Member
Posts: 70
|
Post by tjdjr1 on Mar 4, 2018 8:21:52 GMT -5
gain 13:00, volume 09:00, bass 12:00, mids 10:00, treble 10:00, presence 11:00 using gear 2, clean volume 09:00, bass 10:00, treble 12:00 and gain 03:00. all subject to change A cab vs B cab and venue....
|
|
|
Post by splawndude on Mar 4, 2018 22:56:35 GMT -5
Hey Rodburner,
Welcome to the Splawn Boards!
I deleted your other duplicate thread OK?
It's cool that you started your own thread to ask your question etc.
in o'clock
Pres 11 o'clock Bass 10 Mid 12 Treb 7 o'clock ('0' or off) Gear 2 OD 2 Vol 10 Gain 2
I don't use the clean channel
Good Luck. And have fun!
|
|