|
Post by TuskerKevin on May 27, 2010 19:16:47 GMT -5
Thanks all! I am loving it. It rips!
|
|
|
Post by stratkiller51 on May 28, 2010 7:26:38 GMT -5
excellent choice of colors! weird to see the switches on the right side but absolutley stunning! cant see it, does it have a jack to run an extra cab?
|
|
|
Post by TuskerKevin on May 28, 2010 7:45:12 GMT -5
Yes, it does have a 16 ohm out for an extra cab. Thanks for the color compliment!
|
|
|
Post by DonaldDemon on May 28, 2010 15:13:23 GMT -5
Wow, Kev that looks awesome!!!
I'd like to know more about the transformers as well. Those handles are much nicer than the regular ones!
|
|
|
Post by TuskerKevin on May 28, 2010 16:21:04 GMT -5
Thanks DD! I actually don't know anything about the transformers. As far as I know they are Heyboer like the web page says.....the color of them is kinda cool! Red...for ripping hot!
|
|
|
Post by holyroller on May 29, 2010 19:35:11 GMT -5
Very killer!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
|
|
|
Post by TuskerKevin on Jun 1, 2010 21:42:10 GMT -5
I finally got to use it in a live situation tonight at practice....sounded killer. I ran it alone, and plugged into a Splawn 4x12.............so awesome sounding. It is gain-y, but clear and very defined....typical of Splawns!
|
|
|
Post by porkchops on Jun 3, 2010 20:18:10 GMT -5
How tight is the low end? Just wondering if it would stay intact in dropped tunings.
|
|
|
Post by TuskerKevin on Jun 4, 2010 5:55:09 GMT -5
It is very tight. It does not fart out at all. However, keep in mind that the lowest note going through it so far has been a C#.....("flat" tuned guitar in "dropped D").
|
|
|
Post by SmokinPaul on Jun 4, 2010 16:47:09 GMT -5
Hey Kev, Was wondering....how loud did you turn up the MV to cut through the band without the extension cab?
|
|
|
Post by TuskerKevin on Jun 4, 2010 17:16:53 GMT -5
A little past 9 o'clock...this thing is loud!!
|
|
|
Post by SmokinPaul on Jun 4, 2010 17:33:12 GMT -5
Holy S**t! When you connect the extension cab, does it disconnect the internal speaker? Will it drive 2 4-12's?
|
|
|
Post by splawndude on Jun 4, 2010 21:29:14 GMT -5
wow
um.....wow
HNSAD
|
|
|
Post by TuskerKevin on Jun 4, 2010 22:06:02 GMT -5
Nope, the main speaker stays connected so I had 5-12" speakers going. There is only one speaker out from the back so only one 4X12 can be run. I bet in theory you could remove the back panel and simply disconnect the combo speaker (simple 1/4" plug) and plug in another 4X12...BUT I WILL NEVER DO THIS......and I am thinking no one else should either! Who knows...maybe that would be fine, but seriously, there is no need.....
|
|
|
Post by TuskerKevin on Jun 4, 2010 22:06:53 GMT -5
HNSAD....what does this mean? (sorry)
|
|