|
|
Post by ziff9000 on Oct 7, 2008 21:36:30 GMT -5
Hi everybody, I just got a Splawn 4x12 cab and am confused about the 4 inputs. The back plate has a locking mechanism on the top left input and in between the top two inputs it says 16 mono. Between the bottom 2 inputs it says 8 Stereo. I'm assuming that the top 2 inputs are 16 ohm mono and the bottom 2 are 8 ohm stereo? Is this correct? If the top 2 inputs are indeed mono why are there 2?
Thanks for reading.
|
|
|
|
Post by 4x12 on Oct 8, 2008 1:05:33 GMT -5
The two top inputs are mono 16ohms and the 2 bottom inputs are the stereo 8ohms. Theres 2 16ohms on top because one of them, that locking mechanism, is called a Speakon connector. Gives you the option of using a cable thats got a speakon tip. Heres more info on the Speakon plugs en.wikipedia.org/wiki/Speakon_connectorHope that helps. Joe |
|
|
|
Post by ziff9000 on Oct 8, 2008 1:50:47 GMT -5
Thanks Joe, that helps a lot. Am I allowed to plug a regular 1/4 speaker cable into the locking input or should I just plug it into the regular input?
|
|
|
|
Post by TuskerKevin on Oct 8, 2008 6:57:00 GMT -5
Use the locking input.
|
|
|
|
Post by LooseCannon on Oct 8, 2008 8:17:43 GMT -5
I don't see how a speakon plug would fit in there, it's a 1/4 pl locking jack.
|
|
|
|
Post by VomHalen on Oct 8, 2008 8:36:02 GMT -5
I don't see how a speakon plug would fit in there, it's a 1/4 pl locking jack. he's right...it's a 1/4 locking jack...use that one |
|
|
|
Post by 4x12 on Oct 8, 2008 8:43:02 GMT -5
My mistake dudes... Since it was a locking type I assumed it was a Speakon plug... sorry about that.
|
|
