Hey guys I just purchased the RJM mini amp gizmo. Which is working great, however, I don't think I'm getting all the use out of it. I'm using it with a Line 6 M13. I don't know or understand how to program the gear switching or how do know which buttoms control OD1 or OD2, solo boost, etc.
There's a "map" of the T/R/S assignments in the manual. I'm not familiar with the "Amp Gizmo", but if it's similar to other programmable switchers you'll probably have to do what I did in order to set up my Rocktron Loop-8. The Splawn foot switch jacks are stereo and most switchers are equipped with mono jacks. You'll need two "Y" adapter cables that're stereo on the one end X 2ea. mono on the other. Plug each of the four mono ends into a separate jack on the switcher and the two stereo ends into the amp's foot switch jacks. Various combinations of T/R/S on/off (activating and/or deactivating loops on the switcher) will yield the desired amp function (channel selection, solo boost, OD1/OD2, etc.) Good luck!