|
|
Post by sugarlou on Jan 7, 2009 15:28:29 GMT -5
I've just picked up a Competition.. now I use a TC Electronics G major for my effects but when I patch it into the loop of THIS amp the amp gets crazy brite. I've got the treb and pres on 0 !
anyone else experiencing this?
Also on a side note ..My headshell is white w/gold piping.. I am not a white amp guy..anyone wishing to swap theirs out hit me up at:
broadwaysugarlou@hotmail.com
Really would prefer a black one. Thanks in advance B
|
|
|
|
Post by Ayton(e) on Jan 7, 2009 18:06:28 GMT -5
Few things.
Splawns infamously need to be turned up quite loud to overcome that change you're hearing with the loop. It's mentioned in the manual. Give that a try. If it's too loud, use the G major to control your volume, with the master on the amp itself at 9 o'clock or above. You'll hear it get all warm and smooth out when you get there.
Check your cables. I had some bad cables in the loop that made it sound like a very loud transistor radio. You could have cut glass with that sound.
Turn the Solo knob up to 9 o'clock or above, even if you're not using Solo mode. It affects the tone at lower volumes.
|
|
|
|
Post by jesusdriven on Jan 7, 2009 18:11:06 GMT -5
Few things. Splawns infamously need to be turned up quite loud to overcome that change you're hearing with the loop. It's mentioned in the manual. Give that a try. If it's too loud, use the G major to control your volume, with the master on the amp itself at 9 o'clock or above. You'll hear it get all warm and smooth out when you get there. Check your cables. I had some bad cables in the loop that made it sound like a very loud transistor radio. You could have cut glass with that sound. Turn the Solo knob up to 9 o'clock or above, even if you're not using Solo mode. It affects the tone at lower volumes. What he said. |
|
|
|
Post by sugarlou on Jan 7, 2009 18:28:55 GMT -5
awesome thanks guys ...I am after all just trying to dial things in a bit at home and no the amp is not crankin!
|
|
